Qmark CRA1512T2 Electric Wall Heater (120 volts)
Designed for bathrooms, entranceways, kitchens & more
Compact design provides high heat output where space is limited.
European Styling: Sleek rounded corners.
Clip-N-Fit® feature allows the installer to change the wattage of the heater to a lower output without moving jumper wire.
Optional Clip-N-Fit wattages: 1500w, 1125w, 750 or 375 watts (see manual for more info)
Automatic reset high limit protection
The fan will continue to operate after the temperature is satisfied and until the heating element is cool
Fast-response coil element assures quick heat and low maintenance.
1 year limited Warranty, 2 years on the Element
10 1/2 wide
12 1/4 high
Back Box Dimensions
9 3/8 wide
11 1/8 high
3 3/4 deep
Northern White Finish
1,500 watts (5,118 BTU's)
120 Volts hard wired
Fits in a standard 2x4 wall
Surface adapter for surface mounting (not included).
Heater to floor 4 1/2 in.
Heater to adjacent wall 4 1/2 in.
Heater to ceiling - 12 in.
The optimum mounting height for this heater is 18 to 24 from floor to bottom of back box.
Do not install heater behind towel rack, behind door, in floor, in closet, or where airflow may be obstructed.
To insure proper operation, maintain 5-feet clearance to furniture or other objects placed directly in front of the heater.
Built-in single pole thermostat adjusts from 40° to 85° F.
White metal cover / grille
Surface Mounting Adapter: Recessed mount or surface mounted wall heater options.
With the recess mount option the wall heater in cut into the sheetrock wall.
The surface mount option is often used on concrete walls.
Wall Heater Buyers Guide
Others Qmark Products