Brochure Manual Resource Guide Sizing Chart Qmark CWH35043 Fan Forced Wall Heaters: 240v / 3ph
100 CFM fan forced heater
Built-in thermostat for quick installation... separate thermostat not necessary. (Range: 40-90°F.)
Fan only operation for summer use.
Thermal overheat protector disconnects power in event of overheating due to accidental blockage.
Built-in power disconnect switch for added safety during maintenance.
Built-in fan delay switch energizes fan motor only after elements are heated...prevents discharge of unheated air. When heat shuts off, de-energizes fan motor after residual heat has been dissipated.
Permanently lubricated totally enclosed fan motor provides long life and low maintenance; gently distributes warmth throughout room area.
1 year limited warranty
Cover / Grille Dimensions
15 5/16" W
19 3/16" H
1 1/2" D
Back Box Dimensions
14 5/16" W
18 1/4" H
3 3/4" D
Quick Specs for CWH35043
Northern White Finish
4,800 watts (16,384 BTUs)
240v / 3 ph hard wired
Surface adapter for surface mounting (not included).
Do not install back box closer than 8 from floor or adjacent walls, and 36 from ceiling.
Do not install heater behind towel rack, behind door, in floor, in closet, or where airflow may be obstructed.
To insure proper operation, maintain 3-feet clearance to furniture or other objects placed directly in front of the heater.
Designed for easy installation. Heater is mounted prior to wiring. Both hands are free to make field connections in roomy compartment.
Built-in snap action thermostat (Temp range: 40-90°F)
White metal cover / grille
Recess mounting is standard; surface mounting frame
CWH3SM for surface mounting (Ex. mounting on a block or brick wall)
CWH3S1 for 1" recess
CWH3S2 for 2" recess
finished in Northern White powder coating are optional accessories: 19-3/16 high x 15-3/4 wide.
Wall Heater Buyers Guide
Others Qmark Products