Qmark HBB750 Electric Hydronic Baseboard Heaters (120 volts)
Permanently Installed (NO CORD)
Even after it's off, soft warmth continues to radiate because of maximum heat retention of the hydronic silicone filled element.
Clean, quiet operation, without the noise of a traditional hot water piping system and the noisy blower and dirt of forced-air systems.
Low unit surface temperatures, natural convection and large heating fin areas deliver a steady, uniform comfort level in the room.
Efficient and economical. Individual room control permits heating only in desired areas. Or use as total electric heat source.
Sheathed electric heating element is completely submerged in heat transfer fluid totally sealed in a copper tube spanning the length of the heater. "Heat is transferred evenly across the entire length of heater.
Large wiring compartment is accessible from either end or front, enabling rapid, easy hookup.
Contemporary styling and neutral color blends with any decor. Just three inches deep, unit mounts flush to wall and flat on wood, tile or carpeted floor.
1 year limited warranty on complete unit, 10 years on the element
8 3/8 H
2 15/16 D
Navajo White Finish
750 watts (2,560 BTU's)
120 volts hard wired
Keep all electrical cords, foam filled articles, drapes, bedding and other household furnishings away from contact with heater. It is recommended all items be kept a min, if six (6") inches from heater.
Do not install baseboard heater below electrical outlet.
Navajo White metal cover / grille
Built-In thermostat mounts on the end of baseboard HBBT1: Temp range 40°- 100°F = Sold separately
Wall mounted single pole thermostat M611W: Temp range 45°- 75°F = Sold separately
Non programmable wall thermostat Temp range 37°- 86°F= Sold separately
Programmable wall thermostat: Temp range 37°- 86°F = Sold separately
Electric Baseboard Resource Guide