|
Amba Jeeves ECP-20 E Series Electric Towel Warmer with Curved Bars The units are made of 304 Stainless Steel, which is less likely to corrode/rust.
Wall Mounted
12 Cross Bars (Ύ Thick)
Hard Wired into the Wall (NO CORD)
Not designed to be painted at home.
The bars are filled with water and glycol (Anti-freeze). The whole unit is UL certified in Canada and the USA. The heating element is also UL certified in its own right. Warranty: 5 years parts and Labor Dimensions Width: 20 ½ Height: 31 Depth: 6 ½ Vertical Bars: Ύ Horizontal Bars: 1 Quick Specs Finish Polished Stainless Steel 20 Lbs 150 - 175 watts 120 volts hard wired 1.35 - 1.6 Amps Control Switch: None Operating Temperature: 145ΊF - 154Ί F (built-in thermostat) Installation Wall Mounted: No closer than 1 1/4 from the floor or baseboard Unit should not be mounted closer than 2 below an overhanging surface (i.e. shelf) Included Allen wrench (1) Philips screws #8 x 2.5 (4) Brass Tapered Bushing (4) Slotted Bolts (4) Stainless Tube Assembly (4) Marking Disc (1) Cover plate (1) Screws for Cover plate (2) Wire Connectors suitable for 12-16 AWG wire (6)
Optional Accessory [view]
Amba ATW-T24 Programmable Timer Switch Sold separately Programming: 7-day, up to 14 settings Functions as a single-pole or 3-way switch Operating Modes: 2: manual and automatic
|
