Brochure User's Manual
Follow us on
Toe Kick Heater Details:
Single model offers flexible wattage output with voltage selection
Compact design provides high heat output where space is limited.
It can be recessed into toe space areas under kitchen or utility room cabinets or into the soffit area above them.
It is convenient for many other places where no other heater seems to fit.
Automatic primary and secondary reset thermal cutout for safety
Makes an economical floor warmer
Finned steel heating element.
Pilot light will activate if unit trips on high limit
The enclosure is constructed of 20 gauge steel.
Heating element- The Kick Space heater has four totally enclosed nickel chromium resistance elements with steel sheaths. The elements are complete with spiral steel fins that are brazed to the steel sheath to provide excellent heat transfer.
The grid covers the entire discharge area, resulting in uniform heating
of all discharge air, lower operating temperature and prolonged element life.
Limited 1 Year warranty
23 3/8" W
3 3/8" H
Trim Piece Dimensions
24 1/8 W
4 ½ H
Back Box Dimensions
22 1/8 W
3 ½ H
9 ½ D
80 CFM (Air Flow)
Multiple voltage heaters with two wattage selections per voltage: SEE BELOW Factory Wired For
240/208 Volts 900/675 watts 3.7/ 3.2 Amps
Available Field Wired Options
240 volts hard wired
1,800 watts (6,144 BTUs) 7.5 Amps
120 volts hard wired
1,800 watts (6,144 BTUs) 15 Amps
1,350 watts (4,608 BTUs) 11.2 Amps
900 watts (3,072 BTUs) 7.5 Amps
450 watts (1,536 BTUs) 3.75 Amps
208 volts hard wired
1,350 watts (4,608 BTUs) 6.5 Amps
Wall Mounted Thermostat
Single Pole cuts power to just the black wire
Double Pole cuts power to black & white wires
Do not install heater behind towel rack, behind door, in floor, in closet, in ceiling, or where air flow may be obstructed.
White metal cover / grille