Qmark Models - CFWF920 Fan Forced Electric wall heaters. THIS ITEM TYPICALLY SHIPS FROM SOUTH CAROLINA IN TWO TO THREE WEEKS
Wall Mounting Your Counterflow Wall Furnace is shipped assembled for installation on any wall. It may be recessed up to 5-3/8 inches with studs spaced 16 inches on center, or it may be mounted directly on the wall surface. How it Works This heater works by drawing cool air in at the top grille inlet and pushing it with a fan downward over the heating element. Warm air is discharged into the room through the bottom grille outlet near the floor. The warm air at the floor creates a gentle convective process in the room, preventing stratification of warm air near the ceiling and ensuring comfort for the occupants. Thermostat ( Temp Range 45°-90°) The Counterflow Wall Furnace is controlled by a low voltage wall-mounted thermostat ( Included).
Cover/Grille Dimensions Surface Mounted
14 1/8 wide
72 1/2 height
50 Amp Breaker
6 Gauge Wire (100 feet of wire max)
* Shipping Weight 130 lbs
Made in U.S.A
Optional Accessories Rear Outlet Kit CFWFRO
This accessory allows you to divert some heated air to a second room behind the furnace. The finished wall of this room must be within 10 inches (254 mm) of the furnace. The built-in damper allows you to close the rear outlet, diverting all the air to the front outlet grill. If this accessory is to be used, the opening must be cut in the rear of the cabinet, at this time.
Shipping, The size of our CFWF (counter flow wall furnace), requires that we ship these units by common carrier, and not by UPS or FedEx. They are transported on a wood pallet from Q Mark in South Carolina directly to your destination. THIS ITEM TYPICALLY SHIPS FROM SOUTH CAROLINA IN TWO TO THREE WEEKS
Prior to delivery, (especially our residential customers) the freight company will call you in advance to set up a delivery time. This is why we ask for your daytime phone number. Were sorry that I A P can not make the appointment for you
. There will be two shipping options in the check out section of the web site
Shipping Option (1) One
Standard Freight $ 75.00
The freight company will transport the heater to your curb; you are responsible for removing the heater off the pallet. For the majority of our customers who don't have a fork lift this means separating the unit off the pallet while it is still in the trailer. Please note the heater it self only weighs 65 Lbs
Shipping Option (2) Two
Standard Freight $ 75.00 + 60.00 for lift gate service total freight $ $135.00
and arrange for a motorized lift gate on the trailer for an extra fee. The driver will then off load the pallet on to the ground near the trailer. Please note the delivery time may be a little bit longer when ordering lift gate. Warranty: LIMITED WARRANTY All products manufactured by Marley Engineered Products are warranted against defects in workmanship and materials for one year from date of installation, except heating elements which are warranted against defects in workmanship and materials for five years from date of installation. This warranty does not apply to damage from accident, misuse, or alteration; nor where the connected voltage is more than 5% above the nameplate voltage; nor to equipment improperly installed or wired or maintained in violation of the product's installation instructions. All claims for warranty work must be accompanied by proof of the date of installation.
Locate the thermostat approximately 5 feet above the floor on an inside wall. Do not install back box closer than 0 from floor or 6 adjacent walls
Do not install heater behind towel rack, behind door, in floor, in closet, or where airflow may be obstructed.
To insure proper operation, maintain 3-feet clearance to furniture or other objects placed directly in front of the heater.
White metal cover / grille
Wall Heater Buyers Guide
Others Qmark Products